Structural characteristics of disc granulator machine  
1. Rack part  
Because the transmission part and the whole machine rotating part of the body frame, support a great force, so the machine adopts part of the frame carbon channel steel welding, and through strict quality certification and specific technical requirements, to achieve the purpose of the machine.  
2. Adjust the part  
The important part of the whole machine is the granulating plate, and the whole important part of the granulating plate is installed on the regulating part.  Made of high quality carbon steel plate and channel steel welding, and through strict quality certification, fully meet the requirements of the machine.  
3. Transmission part  
The whole machine transmission part is very important, the whole work has this line.  The motor and reducer installed on the adjustment rack are rabbit inspection products certified by ISO/9001 quality system.  Reliable quality.  The motor drives the pulley and belt.  The reducer and pinion are driven by the pinion, and the big gear on the pellet plate makes the pellet plate work.  In addition, gears of different sizes are hardened by high frequency, and their service life is twice that of the original gear.  The whole ball making plate is fixed on the driving shaft of the regulating plate, and the connecting part of the cylinder head adopts taper matching to make the design more reasonable.  
4. Granulation plate  
The disc Angle of the disc pelletizer adopts the overall arc design, and the pelletizing rate can reach more than 93%. The bottom of the pelletizer also adopts a batch of radiation steel plate to strengthen, durable and not easy to deform.  
5. Automatically clean parts  
The unit is mounted on the top of the pelleting plate to form a lower rack and is equipped with an automatic material cleaning plate to clean materials stuck on the wall during production, greatly increasing the service life of the machine and saving labor.