HOME > News > Company News

What are the advantages of organic fertilizer equipment used in the production of fertilizers?

Update time : 2022-07-05 Publisher:Tongda

Organic fertilizer equipment manufacturers tell you the advantages of using organic fertilizer equipment

1. The organic fertilizer equipment should be fixed on the ground, which can be fixed with cement.

2. After the organic fertilizer equipment is installed, it should be carefully checked whether the installation is in place, and whether the installation is not firm enough. Whether the motor shaft and the pulverizer shaft are parallel, and at the same time check whether the tightness of the transmission belt is appropriate.

3. Before starting the organic fertilizer equipment, first turn the rotor by hand to check whether the operation is flexible and normal, whether there is any collision in the casing, whether the rotation direction of the rotor is correct, and whether the motor and pulverizer are well lubricated, etc..

20.jpg

4. The organic fertilizer equipment should not change the pulley frequently to prevent the speed from being too high or too low.

5. After the organic fertilizer equipment is started, it should be idling for 2 to 3 minutes, and then start feeding and work if there is no abnormal phenomenon.

6. The feeding of the organic fertilizer equipment should be uniform. If there is noise, excessive temperature of the bearing and the body, or material spraying outward, it should be stopped immediately for inspection and troubleshooting.

7. Before the operation of the organic fertilizer equipment, the staff should carefully check the materials to prevent metal, stones and other hard objects from entering the crushing chamber and causing accidents.

8. When feeding, the staff should stand on the side of the organic fertilizer equipment to avoid being injured by the bounced debris. When crushing the long stalks, the hand should not be too tight to prevent the hand from being brought in.

9. The organic fertilizer equipment should stop feeding before shutting down. After the materials in the standby are cleaned up, cut off the power and shut down. After the shutdown, cleaning and maintenance should be carried out.

10. After 300 hours of operation of the organic fertilizer equipment, the bearings must be cleaned and the oil replaced. When loading oil, it is better to fill 1/3 of the bearing seat clearance, and no more than 1/2. The drive belt should be removed when the machine is shut down for a long time.

Pre:Precautions for the use of bio-organic fertilizer - compost turner machine
Next:What should be paid attention to in the maintenance of pig manure organic fertilizer production line

Popular Products

Privacy Policy  Copyright © Henan Tongda Heavy Industry Science And Technology Co., Ltd.