Common failures of organic fertilizer production equipment include the following four points:  
1. Motor overheating and abnormal sound of organic fertilizer production equipment.  Fault causes: poor bearing lubrication or serious wear;  Fan blades fall off or wear;  Bad switch line contact, or broken run single phase;  The voltage is too low. Procedure  
2. The sound of the organic fertilizer production equipment is abnormal in the transportation, and the cylinder is stuck by obstacles, or even can not rotate the cylinder, and the bottom box vibrates.  Causes of failure: stuck by objects in the bottom box;  Magnetic block off, make the cylinder rattling, serious will make the cylinder skin scratch.  At this time should stop maintenance, troubleshooting.  
3. Gear reducer overheats.  Cause of failure: insufficient oil or poor oil quality;  Gear and worm wear too much, or meshing is not good;  Bearing poor lubrication or serious wear.  
4. The magnetic field intensity of organic fertilizer production equipment becomes weak.  Fault cause: The temperature is too high.  Sun exposure;  Acid and alkali corrosion.  It can be measured with a Gauss meter.  The elevation and levelness of the installation base shall be measured with the hollow bearing base (0+1mm).  
 

Once the failure of organic fertilizer production equipment occurs, it is necessary to find out the cause in time. The above points are the detailed explanation of common failures of organic fertilizer production equipment made by Tongda Organic fertilizer Equipment Company for everyone. I hope to help users quickly find the failure of organic fertilizer equipment, and timely deal with the failure to reduce losses.